 |
A cartridge kit consists of the rotating assembly inside the pump.Cartridge construction makes it easy to replace just the cartridge and does not require any special assembly skills or fixtures. A cartridge kit contains pressure plate, side plate, rotor, vanes, cam ring and seals held together with socket head cap screws |
|
Pump Specification
|
Cartridge Kit Specification
|
|
PVR50-*-*-13-L**-3180
|
CPVR50-13L
|
|
PVR50-*-*-13-R**-3180
|
CPVR50-13R
|
|
PVR50-*-*-20-L**-3180
|
CPVR50-20L
|
|
PVR50-*-*-20-R**-3180
|
CPVR50-20R
|
|
PVR50-*-*-26-L**-3180
|
CPVR50-26L
|
|
PVR50-*-*-26-R**-3180
|
CPVR50-26R
|
|
PVR50-*-*-30-L**-3180
|
CPVR50-30L
|
|
PVR50-*-*-30-R**-3180
|
CPVR50-30R
|
|
PVR50-*-*-36-L**-3180
|
CPVR50-36L
|
|
PVR50-*-*-36-R**-3180
|
CPVR50-36R
|
|
PVR50-*-*-39-L**-3180
|
CPVR50-39L
|
|
PVR50-*-*-39-R**-3180
|
CPVR50-39R
|
|
PVR50-*-*-45-L**-3180
|
CPVR50-45L
|
|
PVR50-*-*-45-R**-3180
|
CPVR50-45R
|
|
PVR50-*-*-60-L**-3480
|
CPVR150-60L
|
|
PVR50-*-*-60-R**-3480
|
CPVR150-60R
|
|
PVR50-*-*-70-L**-3480
|
CPVR150-70L
|
|
PVR50-*-*-70-R**-3480
|
CPVR150-70R
|
|
PVR50-*-*-90-L**-3480
|
CPVR150-90L
|
|
PVR50-*-*-90-R**-3480
|
CPVR150-90R
|
|
PVR50-*-*-110-L**-3480
|
CPVR150-110L
|
|
PVR50-*-*-110-R**-3480
|
CPVR150-110R
|
|
PVR50-*-*-140-L**-3480
|
CPVR150-140L
|
|
PVR50-*-*-140-R**-3480
|
CPVR150-140R
|
|
Cartridges of 1050 double pumps are supplied only for the “50” side not for the “1T” side.An example is given below.The number in red signifies the flow rating (could be 13,20,26,30,36,39,45), and the letter in green stands for L (left-hand) or R (right- hand). Please enter the flow rating and the direction specified in your pump. Example:
Cartridges of 50150 double pumps are supplied for either the “50” side (flow ratings 13,20,26,30,36,39 or 45) or for the “150” side ( flow ratings 60,70,90,110 or 140) or for both sides together.An example is given below.The number in red signifies the flow rating for the “50” side. The number in blue signifies the flow rating for the “150” side. The letter in green stands for L (left-hand) or R ( right- hand).Please enter the flow rating(s) and the direction specified in your pump. Example:
|
^^ Back to top
| AIR BLEED VALVES ST-1004 |
|
|
Maximum flow: 10 litres to 75 litres (ST-1004-5) and over 75 litres (ST-1004-10) Maximum operating pressure: 250 kgf/cm2 Cracking pressure: 3.4 kgf/cm2 |
^^ Back to top
| NIPPON ACCUMULATORS |
|
|
|
These accumulators are imported from Japan^^ Back to top
| PIPE FLANGES |
|
MODEL |
PIPE SIZES |
MAX PRESSURE (Kg/cm2)
|
MODEL |
PIPE SIZES |
MAX PRESSURE (Kg/cm2)
|
|
F3 Series
|
F3 Series
|
||||
 |
1/4″ to 3″
|
250
|
 |
1/4″ to 3″
|
250
|
| Socket Welded Type
Available with O Rings and socket head cap screws |
Threaded Connection Type
Available with O Rings and socket head cap screws |
||||
|
F5 Series
|
PIPE SIZES |
MAX PRESSURE (Kg/cm2)
|
F5 Series |
PIPE SIZES |
MAX PRESSURE (Kg/cm2)
|
 |
3/8″ to 4″
|
250
|
 |
3/8″ to 4″
|
250
|
| Socket Welded Type
Surface mounting measurements based on SAE 4 Bolt Spring Flange ( Standard Pressure Series) |
Threaded Connection Type
Surface mounting measurements based on SAE 4 Bolt Spring Flange ( Standard Pressure Series) |
||||
|
KF SERIES
|
PIPE SIZES
|
USAGE
|
 |
3/4″,1″ and 1 1/4″ |
For A Series Piston Pumps – Connect Pump to the suction pipe
|
| * Easy mounting
* Compact size * Cost effective as fittings are reduced * Lower pressure drop |
||
^^ Back to top