Features:
a)These are variable displacement single vane pump with motor.
b)They come with inbuilt pressure compensator and flow cut off for power saving.
Applications:
a)Machine Tool Power packs and Compact Power packs
Download PDF
Features:
a)These Check Valves are flow in one direction & prevent flow in the reverse direction, until operated by pilot pressure to allow free reverse flow.
b)The specified cracking pressure is required to open the valve to allow free flow direction.
Applications:
a)These valves are for pressure locking so that the load does not come down automatically.
b)Suitable for scissor lift and other similar applications.
Download PDF
Features:
a)This valve is used to regulate actuator speeds in a circuit.
b)Integrated check valve allows reverse free flow from outlet to inlet port.
Applications:
a)These valves are used to control speed of actuator.
b)Suitable for High flow circuits viz Steel Mills, Presses, etc
Download PDF
| POWER UNIT | |
 |
YIL can design and manufacture hydraulic systems to suit individual customer requirements. In addition, standard package systems are available which will offer substantial savings, without sacrificing performance. Please consult our office in your area. |
CUSTOM BUILT PRODUCTS FOR YOUR SPECIFIC APPLICATIONS CAN BE DEVELOPED
^^ Back to top
 |
A cartridge kit consists of the rotating assembly inside the pump.Cartridge construction makes it easy to replace just the cartridge and does not require any special assembly skills or fixtures. A cartridge kit contains pressure plate, side plate, rotor, vanes, cam ring and seals held together with socket head cap screws |
|
Pump Specification
|
Cartridge Kit Specification
|
|
PVR50-*-*-13-L**-3180
|
CPVR50-13L
|
|
PVR50-*-*-13-R**-3180
|
CPVR50-13R
|
|
PVR50-*-*-20-L**-3180
|
CPVR50-20L
|
|
PVR50-*-*-20-R**-3180
|
CPVR50-20R
|
|
PVR50-*-*-26-L**-3180
|
CPVR50-26L
|
|
PVR50-*-*-26-R**-3180
|
CPVR50-26R
|
|
PVR50-*-*-30-L**-3180
|
CPVR50-30L
|
|
PVR50-*-*-30-R**-3180
|
CPVR50-30R
|
|
PVR50-*-*-36-L**-3180
|
CPVR50-36L
|
|
PVR50-*-*-36-R**-3180
|
CPVR50-36R
|
|
PVR50-*-*-39-L**-3180
|
CPVR50-39L
|
|
PVR50-*-*-39-R**-3180
|
CPVR50-39R
|
|
PVR50-*-*-45-L**-3180
|
CPVR50-45L
|
|
PVR50-*-*-45-R**-3180
|
CPVR50-45R
|
|
PVR50-*-*-60-L**-3480
|
CPVR150-60L
|
|
PVR50-*-*-60-R**-3480
|
CPVR150-60R
|
|
PVR50-*-*-70-L**-3480
|
CPVR150-70L
|
|
PVR50-*-*-70-R**-3480
|
CPVR150-70R
|
|
PVR50-*-*-90-L**-3480
|
CPVR150-90L
|
|
PVR50-*-*-90-R**-3480
|
CPVR150-90R
|
|
PVR50-*-*-110-L**-3480
|
CPVR150-110L
|
|
PVR50-*-*-110-R**-3480
|
CPVR150-110R
|
|
PVR50-*-*-140-L**-3480
|
CPVR150-140L
|
|
PVR50-*-*-140-R**-3480
|
CPVR150-140R
|
|
Cartridges of 1050 double pumps are supplied only for the “50” side not for the “1T” side.An example is given below.The number in red signifies the flow rating (could be 13,20,26,30,36,39,45), and the letter in green stands for L (left-hand) or R (right- hand). Please enter the flow rating and the direction specified in your pump. Example:
Cartridges of 50150 double pumps are supplied for either the “50” side (flow ratings 13,20,26,30,36,39 or 45) or for the “150” side ( flow ratings 60,70,90,110 or 140) or for both sides together.An example is given below.The number in red signifies the flow rating for the “50” side. The number in blue signifies the flow rating for the “150” side. The letter in green stands for L (left-hand) or R ( right- hand).Please enter the flow rating(s) and the direction specified in your pump. Example:
|
^^ Back to top
| AIR BLEED VALVES ST-1004 |
|
|
Maximum flow: 10 litres to 75 litres (ST-1004-5) and over 75 litres (ST-1004-10) Maximum operating pressure: 250 kgf/cm2 Cracking pressure: 3.4 kgf/cm2 |
^^ Back to top
| NIPPON ACCUMULATORS |
|
|
|
^^ Back to top
| PIPE FLANGES |
|
MODEL |
PIPE SIZES |
MAX PRESSURE (Kg/cm2)
|
MODEL |
PIPE SIZES |
MAX PRESSURE (Kg/cm2)
|
|
F3 Series
|
F3 Series
|
||||
 |
1/4″ to 3″
|
250
|
 |
1/4″ to 3″
|
250
|
| Socket Welded Type
Available with O Rings and socket head cap screws |
Threaded Connection Type
Available with O Rings and socket head cap screws |
||||
|
F5 Series
|
PIPE SIZES |
MAX PRESSURE (Kg/cm2)
|
F5 Series |
PIPE SIZES |
MAX PRESSURE (Kg/cm2)
|
 |
3/8″ to 4″
|
250
|
 |
3/8″ to 4″
|
250
|
| Socket Welded Type
Surface mounting measurements based on SAE 4 Bolt Spring Flange ( Standard Pressure Series) |
Threaded Connection Type
Surface mounting measurements based on SAE 4 Bolt Spring Flange ( Standard Pressure Series) |
||||
|
KF SERIES
|
PIPE SIZES
|
USAGE
|
 |
3/4″,1″ and 1 1/4″ |
For A Series Piston Pumps – Connect Pump to the suction pipe
|
| * Easy mounting
* Compact size * Cost effective as fittings are reduced * Lower pressure drop |
||
^^ Back to top
Our mobile hydraulics product range consists of Mobile Sectional Direction Control Valve, Monoblock Single Spool Direction Control Valve.
Mobile Sectional Direction Control Valve
 |
Model : MDS 04
Maximum Flow : 80 lpm Maximum Pressure : 320 bar Number of Sections :1 to 10 |
SALIENT FEATURES
| Features | Advantages |
| Inbuilt Relief Valve | Easy Replacement of Spool Body |
| Standard Handle Fitment | Cost,Convenient Orientation |
| Feathering | Speed Control Possible |
| Spool Body with Aluminium Cover and Bellow | Prevents Dust |
| Wear Resistant Casting | Long Life |
| Spool Hardened and Plated | Long Life |
APPLICATIONS
| Fork Lifts | Mobile Cranes |
| Front End Loaders | Drill Rigs |
| Brick Making Machines | Presses |
| Mobile Lift Platforms | Mining Machinery |
| Injection Moulding Machines | Agricultural Machinery (Haulers) |
Monoblock Single Spool Direction Control Valve
 |
Model : MDM 03 Maximum Flow : 40 lpm Maximum Pressure : 320 bar Number of Sections : 1 |
SALIENT FEATURES
| Features | Advantages |
| Inbuilt Relief Valve | Cost saving, Compact |
| Feathering | Speed Control Possible |
| Standard Handle | Orientation is possible, Sturdier and Selectable length |
APPLICATIONS
| Fork Lifts | Tractors |
| Car Carriers | Injection Moulding Machines |
| Front End Loaders | Presses |
^^ Back to top
These accumulators are imported from Japan
